2-12 Setup and Operation
OPERATING CONTROLS
The following section describes system controls, the LEDs, and function keys.
Power Button and Status LEDs
Your NEC Versa provides a Power button and LEDs to track system status. Descriptions
of these features follow the figure.
Figure 2-9 Power button and Status LED location
Power Button — The Power button is located on the chassis just below the LCD. It
turns NEC Versa 5000 power on and off. Press the button to turn power on; press it
again to turn power off.
When power is on, the Power LED to the right of the Power button lights. (The
Power LED is the left-most LED in the row of LEDs.) See “Setup Parameters” in
later in this section for information about defining this button as a Suspend/Resume
button.
If your system is in Suspend mode or has gone into Save to Disk mode, pressing
the Power button puts the system in Operation mode.
