1-4 Technical Information
Power Button and Status LEDs
NEC Versa provides a Power button and LEDs to track system status. Descriptions of
these features follow the figure.
Figure 1-3 LCD Status Bar and Button Locations
Power Button — The Power button is located on the chassis just below the
LCD. It turns NEC Versa 5000 power on and off. Press the button to turn
power on; press it again to turn power off.
When power is on, the Power LED to the right of the Power button
lights. (The Power LED is the left-most LED in the row of LEDs.)
See “Setup Parameters” in Section 2 for information about defining
this button as a Suspend/Resume button.
If your system is in Suspend mode or has gone into Save to Disk
mode, pressing the Power button puts the system in Operation mode.
NOTE
After turning off the system, wait 5 seconds
before turning it back on. This gives system compo-
nents a chance to power down properly.
