Technical Information 1-9
PortBar Port — Use these ports to secure the PortBar. A matching Port-
Bar port is located on the right side of the system. Two others are located
on the back.
Around the Bottom of the System
The bottom of the NEC Versa 5000 is the location of the system’s memory module sock-
ets, password override switch, battery pack release latches, VersaBay release lever and
hard disk drive bay, as described next.
Figure 1-7 Bottom of the system
Password Override Switch — This recessed switch removes any settings
that you made in the Setup utility, including your system password.
To remove your password, power on your system. Use a pointed object,
such as a straightened paper clip, to push in the switch. Power off, and
then power on to restart your computer. Go into the Setup utility and set
a new password. Reset any other system settings that you may have
changed.
VersaBay Release Lever Cover — Open the release lever cover to access
the VersaBay Release Lever. Pushing the lever towards the front of the
system releases the device currently installed in the VersaBay.
