NEC VERSA 5060 - SERVICE Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 103

background image

First Printing — October 1997

Copyright 1997

NEC Computer Systems Division, Packard Bell NEC, Inc.

1414 Massachusetts Avenue

Boxborough, MA 01719

All Rights Reserved

PROPRIETARY NOTICE AND LIABILITY DISCLAIMER

The information disclosed in this document, including all designs and related materials, is
the valuable property of NEC Computer Systems Division, Packard Bell NEC, Inc.
(NECCSD, PBNEC) and/or its licensors. NECCSD and/or its licensors, as appropriate, re-
serve all patent, copyright and other proprietary rights to this document, including all de-
sign, manufacturing, reproduction, use, and sales rights thereto, except to the extent said
rights are expressly granted to others.

The NECCSD product(s) discussed in this document are warranted in accordance with the
terms of the Warranty Statement accompanying each product. However, actual
performance of each such product is dependent upon factors such as system configuration,
customer data, and operator control. Since implementation by customers of each product
may vary, the suitability of specific product configurations and applications must be
determined by the customer and is not warranted by NECCSD.

To allow for design and specification improvements, the information in this document is
subject to change at any time, without notice. Reproduction of this document or portions
thereof without prior written approval of NECCSD is prohibited.

NEC is a registered trademark, Versa is a U.S. registered trademark, MiniDock, VersaBay, VersaGlide, and

PortBar are trademarks, and UltraCare is a U.S. registered service mark of NEC Corporation, used under
license.

FaxFlash is a service mark of NEC Computer Systems Division (NECCSD), Packard Bell NEC, Inc.

All other product, brand, or trade names used in this publication are the property of their respective owners

.

1
2
3
...
»

Содержание VERSA 5060 - SERVICE








































































































Отзывы:

Нет отзывов

Похожие инструкции для VERSA 5060 - SERVICE

Бренд: Clevo Страницы: 104

visionbook 12WRx

Бренд: UMAX Technologies Страницы: 72

Бренд: ECS Страницы: 92

Бренд: Gateway Страницы: 168

aspire Aspire 9300

Бренд: Acer Страницы: 143

Бренд: Acer Страницы: 326

Aspire 8943G Series

Бренд: Acer Страницы: 370

ASPIRE Aspire 7100

Бренд: Acer Страницы: 87

Aspire 7540 Series

Бренд: Acer Страницы: 186

Бренд: Acer Страницы: 32

Бренд: Acer Страницы: 33

Бренд: Acer Страницы: 32

Бренд: Acer Страницы: 32

Бренд: Acer Страницы: 31

Бренд: Acer Страницы: 32

Бренд: Fujitsu Страницы: 36

Бренд: Lenovo Страницы: 5

Бренд: Lenovo Страницы: 97

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды