Using the Menu Tree
29
TCP/IP Setup
You can use the operator panel to enable and set up the TCP/IP networking parameters for the printer. This is
particularly useful for setting the network IP address so you can use it as the printer’s URL in web-based printing.
Follow these steps.
1.
Press the
Online
button of the Operator Panel
.
OFFLINE
appears on the display.
2.
Press the
Menu
button to enter menu mode.
CONTROL
appears on the display.
3.
Press the
Next
button until
COMMUNICATIONS
appears on the display, and press the
Select
button.
4.
Press the
Next
button until
NETWORK
appears on the display, and press the
Select
button.
5.
Press the
Next
button until
TCP/IP
appears on the display, and press the
Select
button.
6.
Press the
Next
button until
NET ADDRESS
appears on the display, and press the
Select
button.
7.
Use the Operator Panel buttons to set values for each of the 12 digits in this manner.
First press
Next
to set the curser to the first digit.
For the first digit, press
Select
to increment to the correct value. Then press
Next
to move to the next digit and
press
Select
to increment to its correct value. Continue until all twelve digits are set. When the final digit is set,
press
Next
to confirm the Net Address you set and then press
Select
.
8.
Press
Menu
to exit menu mode and press
Online
to bring the printer online.
SUBNET MASK
, and
GATEWAY
are set in the same way. If you select
ENABLE
, the TCP/IP protocol is enabled.
To validate any changes to network settings, you must turn the printer off, and then on again.
U
SING
THE
M
ENU
T
REE
You can use the Operator Panel to set communications channels, print forms or pages, view usage reports, use
special features, or change printer settings. (However, in most cases, you will use your printer drivers to change
printer settings.) Follow these three basic steps to enter menu mode and navigate through the menu tree
1.
Turn on the printer, if necessary.
2.
Press
Online
to turn the indicator light off and take the printer offline. The display changes from
READY
to
OFFLINE
.
3.
Press
Menu.
The display changes to
MENU CONTROL
.
4.
You navigate through the menu tree by pressing the menu selection buttons on the operator panel.
•
Press
Next
to go to the next item in a menu.
•
Press
Previous
to go to the previous item in a menu.
•
Press
Select
to go to the next menu level or to choose the displayed setting if you are at the lowest menu level.
•
Press
Item
to move back to the previous menu level.
•
Press
Menu
to exit menu mode. If you changed any network settings, you must restart the printer to validate
the new settings
•
An Example of Using the Menu Tree
Содержание Super Script 4400
