NEC Super Script 4400, Руководство по обслуживанию

Страница: 307 / 317

12 Superscript 4200N and 4400 Series Maintenance Guide — Addendum
Appendix H
4400 S
ERIES
O
PERATOR
P
ANEL
M
ESSAGES
This appendix is new to the Maintenance Guide.
This appendix lists three categories of messages that can appear on the operator panel display.
• Status Messages
• Alert Messages
• Service Call Messages
S
TATUS
M
ESSAGES
Status messages indicate the current operational state of the printer.
Message Explanation
Line 1:
Line 2:
INITIALIZING Indicates that the printer is initializing.
Line 1:
Line 2: RESETTING Indicates that the setup on the front panel returns to the default state.
Line 1:
Line 2: WARMING UP Printer is not yet ready to operate. It is performing an initial power up
check or the fuser unit is warming up to operating temperature.
Line 1:
Line 2: READY Printer is online and ready to print under Auto Emulation Switching mode.
Line 1:
Line 2: PRINTING Printer is printing a page.
Line 1:
Line 2: PROCESSING Printer is processing a job.
Line 1:
Line 2: PRESS FEED TO PRINT For job hold feature, this message prompts the user to release the print job
for printing. If no key is pressed after a time-out period, the print job is
released and this message is changed to “Printing”.
Line 1:
Line 2: WAITING Printer is waiting for additional input to complete the print job.
Line 1:
Line 2: POWER SAVE MODE Printer is in power saving mode. When the printer receives a print job,
data, or if the Online button is pressed, the printer returns to ready mode.
Line 1:
Line 2: MEDIA TYPE
PAPER Shows the current paper type when user presses Media button.
Line 1:
Line 2: MEDIA TYPE
TRANSPARENCY Shows the current paper type when user presses Media button.
Line 1:
Line 2: MEDIA TYPE
THICK STOCK Shows the current paper type when user presses Media button.
Line 1:
Line 2: SELECTED When some parameter is selected.
Line 1:
Line 2: TEST PRINT Printer is printing a test page.
Line 1:
Line 2: SPOOLING