NEC Super Script 4400, Руководство по обслуживанию

Страница: 281 / 317

VIII SuperScript 4400 — Maintenance Guide
APPENDIX C
SAFETY INFORMATION
This chapter provides safety information and product specifications for the SuperScript 4400 printer. As you
operate your printer, please be aware of the following safety considerations.
Ozone Emission
The corona assemblies found in laser printers and photocopiers generate ozone gas (O3) as a by-product of the
electrophotographic process. Ozone is only generated while the printer is printing (while the coronas are
energized).
UL Standards for Ozone
The only existing standard for ozone emissions has been established by Underwriters Laboratory (UL). All
SuperScript family printers meet this standard when shipped from the factory to our customers.
Employer Responsibilities
Because ozone can be an irritant, various regulatory agencies have established limits to the amount of ozone to
which employees may be exposed. The employer is responsible for providing a safe work environment that meets
the agencies’ standards.
Recommendations for Minimizing Ozone Exposure
Almost all ozone concerns arise from abnormal site or operating conditions. The following conditions may
generate an ozone complaint:
•
Installation of multiple laser printers in a confined area
• Extremely low relative humidity
• Poor room ventilation
• The exhaust port of the printer is directed towards the face of personnel
• The existing ozone filter is in poor condition
• Long, continuous printing combined with any of the above
Inspect your work environment for the operating conditions listed above if you believe ozone emissions are a
problem in your area. Some people may be ultra-sensitive to ozone odor. If these situations are encountered, it is
advisable to position the printer away from the sensitive user.
Laser Safety
This printer is certified as a Class 1 laser product under the U.S. Department of Health and Human Services
(DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968.
This means that the printer does not produce hazardous laser radiation.
Since radiation emitted inside the printer is completely confined within protective housings and external covers,
the laser beam cannot escape from the machine during any phase of user operation.
CDRH Regulations
The Center of Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented
regulations for laser products on August 2, 1976. These regulations apply to laser products manufactured after
August 1, 1976. Compliance is mandatory for products marketed in the United States. The printer’s rear panel
indicates compliance with the CDRH regulations and must be attached to laser products marketed in the United
States.
Caution!
Caution! Use of controls, adjustments, or performance of procedures other than those
specified in this user’s guide may result in hazardous radiation exposure.