NEC PowerMate SPB-Wash, Руководство пользователя

Страница: 91 / 222

5-4 Installing Options
„
When installing a cable, route the cable so it is not pinched
by other components and is out of the path of the system
covers. Prevent damage to the connectors by aligning
connector pins before you connect the cable.
„
When disconnecting a cable, always pull on the cable
connector or strain-relief loop; do not pull on the cable
itself.
Cover Removal and Replacement
The following sections explain how to remove and to replace
the access cover from your computer.
Note that the access cover is on the top of the desktop model
and on the right side of the minitower model.
Note:
It is recommended that you place the
minitower model on its side with the base over
the edge of a table to remove/replace the access
cover and add options. In this position, the
following figures apply to the minitower as well as
the desktop.
Removing the Access Cover
The following procedure describes how to remove the system
access cover.
1.
Turn off the computer.
2.
Disconnect the keyboard, mouse, monitor, and any other
external options (such as a printer) from the rear of the
computer.
Label all cables to make reinstallation easier.