2-10 Setup and Operation
Click on “Continue” or press
Enter
again.
Insert 3COM EtherDisk
®
driver diskette in A:\ .
Scroll down the list and select “<other> Requires Disk From
Manufacturer” press
Enter.
At the Insert Disk Screen type
A:\NDIS\WINNT35
press
Enter.
Select “3COM Fast EtherLink PCI 10/100 Base-T Adapter (3C595)” in
the OEM Option Screen and click “OK” or press
Enter.
Choose the network protocol and click on “Continue” or press
Enter
.
The default is “TCP/IP Transport.”
At the TCP/IP Configuration Screen make your selection(s) and click on
“Continue” or press
Enter.
At the Domain/Network Setting Screen make your selection(s) and click
on “OK” or press
Enter.
n
if your system comes without a network card, or you choose not to install a
network card at this time, continue as follows.
Click on “Continue” or press Enter.
Click on “Continue” or press Enter again.
Click on the “No Network” button.
To confirm no network card is to be installed click “OK” or press
Enter.
21.
When asked for the Administrators Account Password, enter a password if you
desire (it is not required).
22.
When asked for the Local Account Password, enter the user’s name and tab to
the next field and enter the password. Click on “Continue” or press
Enter.
23.
Choose the default application name and click on “Continue” or press
Enter
.
Windows NT will find the applications, “MS-DOS Editor” is the default.
24.
Set the local time, date and time zone for your area and click on “OK” or press
Enter.
25.
At the Detected Display window click on “OK” or press
Enter.
26.
Accept the Display Setting screen default, click on “OK” or press
Enter
.
Procedures on installing Matrox
®
video driver are provided later in these release
notes.
Содержание POWERMATE PRO150
Страница 152: ...A 16 Connector Pin Assignments ...
Страница 160: ...B 8 System Board Settings ...