NEC POWERMATE 8100 Series, Инструкция по обслуживанию и справочник

Страница: 92 / 273

2-60 System Configuration
NEC Driver CD
The system comes with an NEC Driver CD. The CD contains the device drivers
that were delivered on the system, and a full set of optional drivers that
correspond to hardware options offered by NEC CSD. If installing optional
hardware in the system, or making other system enhancements, use the NEC
Driver CD to install the drivers required for system operation.
Read this section in its entirety before using the NEC Driver CD to install any
optional drivers on the system.
Installing Drivers With the NEC Driver CD
Follow these steps to install optional drivers that have not been factory-installed
on the hard drive.
!
CAUTION
Do not select and install drivers for any hardware that is not
currently installed on the system. Doing so can damage the
operating system.
1.
Install the device requiring the new driver before installing the driver.
2.
With the operating system running, insert the NEC Driver CD into the
CD-ROM drive.
The CD autorun feature launches the NEC Driver CD window.
3.
Access the subdirectory that corresponds to the driver being installed.
4.
Double click the setup.exe icon corresponding to the driver being installed.
!
CAUTION
When running a setup.exe program, do not select and install
drivers for any hardware that is not currently installed on the
system. Doing so can damage the operating system.
5.
Follow the prompts in the installation wizard to install the driver.
6.
Repeat steps 1 through 5 for each driver being installed.
7.
Restart the computer to ensure that the installation process completes
successfully.