NEC POWERMATE 8100 Series, Инструкция по обслуживанию и справочник

Страница: 104 / 273

Disassembly and Reassembly 3-7
5.
Place the slot cover over the slot and secure it with the slot cover screw (see
the following figure).
Installing an Expansion Slot Cover
A – Slot Cover Screw B – Slot Cover
6. Replace the system unit cover as previously described.
Front Panel Removal
Remove the front panel before installing a device in one of the 5 1/4-inch
accessible device bays.
If you are installing an accessible 5 1/4-inch device, you also need to remove the
blank panel that covers the bay on the front panel (see “Blank Panel and Metal
Bay Cover Removal”).
Remove the front panel as follows:
1. Remove the system unit cover (see “Removing the Cover”).
2.
Squeeze the locking tabs on each side of the front panel (see the figure on
the following page).
Note: Two pop-in tabs and two locking tabs on the back
of the front panel secure it to the chassis. The tabs on the
top of the front panel (see the following figure) are locking
tabs that must be squeezed before the panel can be
removed. The pop-in tabs on the panel insert into the holes
in the chassis.