NEC POWERMATE 8100 Series, Инструкция по обслуживанию и справочник

Страница: 227 / 273

Release Notes A-3
The Internet Explorer 4.01 version for Windows 95 and Windows NT
includes Service Pack 1 (SP1) which takes time to initialize after setup.
Be sure to wait for the initialization process to complete before you
attempt to install LANDesk Client Manager. Wait until all disk activity
has stopped.
!
CAUTION
Installing LANDesk Client Manager before Internet Explorer
4.01 completes initialization causes a DMI “start failed to
launch Intel LANDesk Client Manager” error.
„
Install LANDesk Client Manager alone and before installing NEC
Security, Cheyenne Backup utility, NEC Configuration Change
Notification, the NEC Auto Backup utility, or NEC WebTelligent.
Note:
LANDesk Client Manager should be installed
before any of the applications or utilities that function in
conjunction with it. Install NEC Security, Cheyenne Backup
utility, the NEC Configuration Change Notification, NEC Auto
Backup utility, and the NEC WebTelligent software
after
installing LANDesk Client Manager. (The NEC Auto Backup
utility is not available on SCSI-based systems.)
„
Do not install both the NEC SNMP Agent and LANDesk Client Manager
on the same computer. The two applications are incompatible and neither
can be removed using the uninstall utility. To remove them, a full restore
must be performed after which all applications must be reinstalled.
!
CAUTION
Do not install both the NEC SNMP Agent and LANDesk
Client Manager on the same computer.
„
The NEC SNMP Agent and the NEC WebTelligent software are each
installed using a Setup.exe program launched from a subdirectory on the
NEC Select Install CD. These applications can be installed without regard
to the order in which other applications are installed.
„
Applications other than LANDesk Client Manager, Internet Explorer, the
NEC SNMP Agent, or the NEC WebTelligent software can be installed
during the same Select Install session or, if installed in different sessions,
in any order once Internet Explorer and LANDesk Client Manager are
installed. (The NEC Auto Backup utility is not available on SCSI-based
systems.)