NEC POWERMATE 8100 Series, Инструкция по обслуживанию и справочник

Страница: 23 / 273

System Overview 1-7
„
Printer port — Attach a parallel printer with a 25-pin connector to this
port.
„
VGA monitor connector — Attach a video graphics array
(VGA)-compatible monitor (NEC MultiSync
®
monitor, NEC VistaScan
™
monitor or other VGA-compatible monitor) with a 15-pin connector to
this AGP board connector.
„
Expansion board slots — Use these slots to install up to three optional
boards (graphics, fax/modem, SCSI) in the system.
„
Fax/modem port — Some systems come with a 56-Kbps fax/modem
board in an expansion slot. The board allows the connection of a phone
line to the system for fax and data communications.
Inside Features
The following figure shows the interior of the desktop system, with callouts to
the major areas of the model. A list of features follows the figure.
Inside the Desktop System
A – System Board D – Riser Board
B – AGP Board E – Internal Device Slot
C – Expansion Board Slots F – Accessible Device Slots
The inside of the system has the following features:
„
system board with connectors for the Celeron, Pentium II, or Pentium III
processor, DIMM memory, AGP board, and external devices
„
riser board with two IDE connectors, diskette drive connector, expansion
board connectors, and internal signal and power connectors
„
AGP board (a built-to-order component)
„
3Com 3C905-B-TX-L-100 network board
„
two accessible 5 1/4-inch bays for expansion