NEC POWERMATE 8100 Series, Инструкция по обслуживанию и справочник

Страница: 78 / 273

2-46 System Configuration
6.
After selecting the FAT type, a warning screen appears indicating that the
system is about to partition and format the hard drive using the FDISK
program. This warning screen contains three options: Back, Exit, and
Continue.
„
Click
Back
to return to the Partition Information screen.
„
Click
Exit
to terminate the restore process.
„
Click Continue to perform FDISK.
7. If
Continue
is clicked, the system performs FDISK using the FAT type
selected and reboots the system. After the reboot, all partitions are
formatted. When all the partitions have been formatted, the OS loads from
the CD. The Installing Applications screen appears. This screen also
displays the version of the Windows OS being installed.
The drivers and other software components required for the OS are also
loaded from the CD.
After the OS finishes loading, the “Operating System Restore Completed”
screen appears.
8.
Remove the CD from the CD tray.
9.
Click OK to reboot.
This completes the Auto Rebuild and Restore procedure.
To reinstall any of the applications or device drivers that came with the
computer, follow the procedures in “Installing Applications” and in
Appendix A, “Release Notes.”
To install drivers that didn’t come with the computer follow the procedures in
“NEC Driver CD.”
Custom Rebuild and Restore
To perform a custom OS Restore with choices on repartitioning and/or
reformatting the hard drive, boot the system from the Select Install CD. When
the system boots from the CD, it automatically loads the MS-DOS-based
Operating System Restore program.
!
CAUTION
If possible, back up the data before performing an OS
restore.
Follow these steps to perform a customized restore of the original, factory-
installed operating system using OS Restore.