manualshive.com logo in svg

NEC NEAX 7400 IMX, Руководство по управлению

Поделиться
Скачать
NEC NEAX 7400 IMX Скачать руководство пользователя страница 782

ND-70348 (E)

CHAPTER 4

Page 743

Revision 3.0

AGNPL

AGNPL:  Assignment of Guest Numbering Plan for LDM

1. General

This command is used to assign the minimum number of digits needed to determine the service which is re-
quired to the first digit received (pre-translation).

2. Precautions

1.

This command is used for the Hotel Application.

2.

If the Guest and Admin. Numbering are separated (the ASYD command, SYS1, INDEX 160, bit6=0), use
this command for the Guest Numbering plan. For the admin. numbering plan, use the ANPDN command.

Note:

Hotel features are available in TN1 only. If the numbering plans are separated by tenants, the purpose for
each tenant is completely separated.
Admin. Station required of the guest room call must be allocated in TN1.

3.

Use this command to assign the numbering data for the operator call and the priority call (terminating to
ATT) in the Netfusing Network.

4.

The numbering data for Telephone numbers may be programmed by this command, however, those Tele-
phone numbers are available in the self node only.

Telephone numbers available within the Netfusing Network are to be programmed at Network Control
Node (NCN) by using the AGNPN and AGSPN commands.

5.

The system data assignment (ASYDL, SYS1, INDEX 513, bit0=1) is necessary for using the AGNPL com-
mand.

Содержание NEAX 7400 IMX


























































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды