manualshive.com logo in svg

NEC NEAX 7400 IMX, Руководство по управлению

Поделиться
Скачать
NEC NEAX 7400 IMX Скачать руководство пользователя страница 470

 

ND-70348 (E)

CHAPTER 4

Page 463

Revision 3.0

AMAT

 

AMAT:  Assignment of Master Attendant Data

 

1. General

 

When more than one Attendant Console has been installed for one tenant, this command assigns a Master Con-
sole for controlling the Day/Night function of all the Attendant Consoles on a tenant basis.  

 

2. Precautions

 

1.

This assignment is necessary when Day/Night changeover is controlled by a Master Console (the ASYD
command, SYS 2, INDEX 2, bit2=1 & bit3=0).

2.

If this Master Console is placed in the Night mode, all incoming calls will be directed to TAS or a Night
Connection Fixed station.

3.

The applicable tenant number (TN) range is designated by the ASYD command, SYS 1, INDEX 8. 

4.

The maximum number of Attendant Consoles (Attendant Consoles) should be assigned by the ASYD com-
mand, SYS 1, INDEX 9.

 

3. Data Entry Instructions

 Enter the desired Attendant Console to be operated as a master.
1=Attendant Console which is assigned as RT=901(ATT) by the ATRK command. (MATN)
2=Attendant Console which is assigned as RT=915 (NATT) by the ATRK command. (NATN)  

MODE

(MODE)

1/2

TENANT NUMBER

(TN)

ATTENDANT NUMBER (ATN)

REMARKS

Enter desired Attendant Console number assigned by the ATRK command. 

ATN

Содержание NEAX 7400 IMX


























































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды