manualshive.com logo in svg

NEC NEAX 7400 IMX, Руководство по управлению

Поделиться
Скачать
NEC NEAX 7400 IMX Скачать руководство пользователя страница 536

ND-70348 (E)

CHAPTER 4

Page 519

Revision 3.0

ASHU

ASHU: Assignment of Station Hunting Group-UCD

1. General 

This command is used to assign the data related to the Uniform Call Distribution (UCD) service feature. 

2. Precautions

1.

This command is also used to modify and delete the UCD service related data.

2.

The maximum number of stations within a UCD group is 100.

3.

The UCD pilot station (controlling station) is assigned at the STN parameter. 

4.

Press ESC to skip forward to the WRT? text box when all the desired stations have been entered. 

5.

Assign the AUAD command if the Delay Announcement-UCD service feature is required.

6.

Assign the AUCD command if the peripheral threshold as listed below is required:

(a) The number of call in UCD queuing which is used for the UCD Peg Count   

(b) The threshold of the UCD Call Waiting Lamp (which accommodated on a D

term

) starts to flash 

(c) Denial of the MCI call result text of the call terminated to the UCD group 

7.

Assign AUOG command if the Overflow-UCD service feature is required.

8.

When assigning the AUAD/AUCD/AUOG commands, the tenant number (TN) and the UCD Pilot station
(controlling station) number (STN) assigned in this command are used to specify the UCD group.

9.

The applicable tenant number (TN) range is designated by the ASYD command, SYS 1, INDEX 8. 

Содержание NEAX 7400 IMX


























































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды