NEC N8800-096F, Руководство пользователя

Страница: 88 / 427

General Description 2-33
Power OFF
Follow the steps below to turn off the power. If NEC Express5800/ft series is plugged to a UPS, see
manuals included with the UPS or the application that controls the UPS.
1.
Perform a normal shutdown from Windows Server 2003.
The system will be powered off automatically. (Note: the POWER LED on the primary
side will remain illuminating when AC power is supplied.)
2.
Power off all peripheral devices.
POST Check
POST (power-on self test) is a self-test function stored on the motherboard of NEC Express5800/ft
series.
When you power on the server, POST will start automatically to check the motherboard, ECC
memory modules, CPU modules, keyboard, mouse, etc. It also shows startup messages for various
BIOS setup utilities.
According to the factory default settings, the “NEC” logo appears on the display while POST is
being performed. (To view POST’s details, press
Esc
.)
TIPS:
„
You can view POST details from the beginning without the need to press
Esc
when the
BIOS menu is displayed: select [System Configuration] - [Advanced], and set [Boot-time
Diagnostic Screen] to "Enabled" (see Chapter 4).
„
You can view the test items and details from a management PC where NEC ESMPRO
Manager or NEC DianScope is installed.
You do not always need to check POST details. You will need to check messages when:
„
You install a new NEC Express5800/ft series.
„
A failure is suspected.
„
You hear several beeps between the time of the power-on and OS start-up.
„
The display unit shows an error message.