NEC N8800-096F, Руководство пользователя

Страница: 172 / 427

System Configuration 4-35
Advanced Configuration
When you select “Advanced Configuration” and press the
Enter
key, the display changes as shown
below:
The following table provides information on options and their functions.
Option Parameter Description
Reset SCSI Bus at IC
Initialization [Enabled]
Disabled Set “ Enabled. ”
Display <Ctrl><Alt> Message
During BIOS Initialization [Enabled]
Disabled Set “ Enabled. ”
Extended Int 13 Transfer for
DOS Drivers > 1 Gbyte [Enabled]
Disabled
Set
“
Enabled.
”
Post Display Mode [Verbose]
Silent
Diagnostic Do not change the settings unless it is
necessary.
SCSI Controller Int 13
Support [Enabled]
Disabled: NOT Scan
Disabled: scan bus Select whether or not to enable SCSI BIOS.
Select “Enabled” except
z
when starting up the OS from a hard
disk drive other than those connected to
the SCSI controller (it is OK if no hard
disk drive is connected to controller
other than SCSI controller).
z when reserving a space in the extended
ROM space. In this case, you can
disable the BIOS of a SCSI controller to
which no hard disk drive is connected.
Domain Validation [Enabled]
Disabled Set “Enabled.”
Support Removable Disks
under Int 13 as Fixed Disks Boot Only
All Disks
[Disabled] Options controlled by removable media are
supported by AIC-79xx BIOS.
BIOS Support for Bootable
CD-ROM [Enabled]
Disabled Set “Enabled.”
[ ]: Factory-set