NEC N8151-32B, Руководство пользователя

Страница: 71 / 92

63
Eject Button and Busy Indicator
The front panel on the front of the Built-in DVD-RAM drive has an eject button used to open
or close the tray and a busy indicator indicating the operation status of the Built-in DVD-
RAM drive.
Press the eject button to eject the disk put on the Built-in DVD-RAM drive. If the relevant
software prohibits the disk from being ejected, pressing the switch cannot have the disk
ejected.
•
Depending on the usage environment (including the computer, operating system,
device driver, and formatting software), a predefined procedure may be required to
eject the disk from the Built-in DVD-RAM drive correctly or the disk may be ejected on
the computer screen without the depression of the eject button.
•
Do not push the eject button while the busy indicator is illuminating. If the eject button
is pressed while the busy indicator is illuminating, the disk will be ejected only after
the busy indicator goes off.
The busy indicator illuminates green during inserted disk formatting, data seeking in the
disk, or data read/write operation.
Inserted media Operation status Indication
Writing Blinking green
Reading Off
DVD-RAM disk
Stand-by Off
Reading Illuminating green CD-ROM or similar disk
Stand-by Off
Reading Illuminating green CD/DA or similar disk
Stand-by Off
No disk insertion — Off
Disk inserting/ejecting — Blinking green
Tray
Busy indicator
Eject button