NEC N8151-32B, Руководство пользователя

Страница: 68 / 92

60
Connecting Power Cable to the Built-in DVD-RAM Drive
Select an unused cable from the DC power cables coming from the power unit in the
computer and insert the cable to the power connector on the rear of the Built-in DVD-RAM
drive.
For the DC power cable connectable to the Built-in DVD-RAM drive, refer to the manual
of the computer.
Executing Self-diagnosis
At the power-on of the computer, the Built-in DVD-RAM drive automatically starts the self-
diagnosis.
The result of the self-diagnosis is indicated by the busy indicator on the front face of the
Built-in DVD-RAM drive. Do not forget to check the result.
If the self-diagnosis does not found any problem, the busy indicator will go off.
If the indicator does not go off or you suspect the occurrence of an error, see Chapter 4 to
find the cause of the fault.
DC power cable