NEC N8151-32B, Руководство пользователя

Страница: 65 / 92

57
Fixing the Built-in DVD-RAM drive in 5.25-inch device bay directly without
installation of latching rails on the Built-in DVD-RAM drive
1.
Turn off the power of the computer and pull out the power cord from the AC inlet.
2.
Remove the proper covers on the computer. (Refer to the manual attached to the
computer for details.)
3.
Insert the Built-in DVD-RAM drive into the 5.25-inch device bay.
4.
Fix the Built-in DVD-RAM drive to the 5.25-inch device bay with the four screws
coming with the Built-in DVD-RAM drive, or M3 screws having screw length of 6
mm.
Fix the Built-in DVD-RAM drive to the 5.25-inch device bay with two screws on
each of the left and right sides.
Left side Right side
CD-ROM drive
(factory installed in the computer)
Built-in DVD-RAM Drive
Screws (2) Screws (2)
Locate the Built-in DVD-RAM drive so that the front face
is aligned with those of other devices.
Built-in DVD-RAM Drive
CD-ROM drive
(factory installed in the computer)