Configuring Your Server 4-5
Main
Option
Parameter
Description
Your Setting
System Time
HH:MM:SS
Set the system time.
System Date
MM/DD/YYYY
Set the system date.
Hard Disk Pre-Delay
[Disabled]
3 seconds
6 seconds
9 seconds
12 seconds
15 seconds
21 seconds
30 seconds
When accessing the internal IDE
device for the first time during
POST, the system waits for the
specified time until the device
becomes ready.
Primary IDE Master/
Primary IDE Slave
Secondary IDE Master/
Secondary IDE Slave
Select submenu
Set the information on the device
connected to each channel on
the submenu. The settings of
some items may be changed.
However, leave the items as they
are at the shipment.
Processor Settings
Select submenu
Shows the processor settings
submenu.
Language
[English (US)]
Français (FR)
Deutsch (DE)
Español (SP)
Italiano (IT)
Select which language BIOS
displays.
[ ]: Factory-set
IMPORTANT:
Check and adjust the system clock before the
operation if any of the following conditions is applicable.
– After carriage of device
– After storage of device
– After the device is entered into the pause state under the
environmental condition enduring device operation (temperature:
10°C - 35°C, humidity: 20% - 80%)
Check the system clock at the rough rate of once per month. When the
system clock is installed in a system requiring high time precision, it is
recommended to use a time server (NTP server).
If the system clock is remarkably delayed or advanced as the passage of
time in spite of adjustment, contact your service representative to ask
maintenance.
Содержание N8100-1417F
