NEC MultiSync XG-1352C, Руководство по установке

Страница: 60 / 142

60
ADJUSTMENT
m
Adjusting POINT ACAT
This feature automatically corrects convergence for overall screen
adjusting 13 convergence points on R and B CRT respectively.
Before adjusting
• To improve accuracy on convergence correction, you must first
adjust the convergence phase and the cursor phase for the best
image.
• You can also correct the static convergence using ACAT feature.
For more accurate ACAT convergence correction, first perform
the static convergence using STATIC feature on OPERATE
menu or pressing the STATIC button on the remote control.
• You must adjust the convergence to all the 13 points because
ACAT feature calculates all the adjustment values on the entire
screen based on the adjustments values of 13 points on the
screen.
• If convergence points on the edges go out of screen, reduce the
horizontal and the vertical amplitude settings using the amplitude
feature of the ALIGNMENT menu so that all the 13 convergence
points can be seen on the screen. After adjusting ACAT, return
the horizontal and the vertical amplitude settings to their original
and store them.
• The POINT ACAT convergence adjustment is done roughly. So
performing the POINT ACAT can change the convergence
adjustment settings even if you finely adjust the convergence
adjustment.