NEC MultiSync XG-1352C, Руководство по установке

Страница: 103 / 142

103
SETTING
6
To end this mode, press the END button.
• Whenever the END button is pressed, the menu will sequence
in this order.
“OPTION” menu
→
”ADJUST” menu
→
Source screen
• If the “RETURN USER MODE?” menu appears, use the
CURSOR or button to select either “YES” or “NO”
and then press ENTER. This will exit the ADJUST mode.
Items to select
•
YES ..... When you try to enter the ADJUST mode the next time,
you will need to re-enter your passcode.
•
NO ....... When you try to enter the ADJUST mode the next time,
you will not need to re-enter your passcode.
S L O T – 0 1
S L O T – 0 2
S L O T – 0 3
S L O T – 0 4
S L O T – 0 5
S L O T – 0 6
S L O T – 0 7
S L O T – 0 8
S L O T – 0 9
S L O T – 1 0
R
R
R
R
R
R
R
R
R
R
S L A V E
When used with a single Switcher ISS-6020/ISS-6020G:
Items to select
•
MANUAL ....... Searches RGB or COMPONENT signals only
( for each slot).
•
AUTO ............. Searches COMPONENT signals automatically
after searching RGB signals ( for all slots).
SIGNAL FORMAT
RGB
COMPONENT
S L O T – 0 1
S L O T – 0 2
S L O T – 0 3
S L O T – 0 4
S L O T – 0 5
S L O T – 0 6
S L O T – 0 7
S L O T – 0 8
S L O T – 0 9
S L O T – 1 0
M A S T E R
SIGNAL FORMAT
RGB
COMPONENT
S L O T – 0 1
S L O T – 0 2
S L O T – 0 3
S L O T – 0 4
S L O T – 0 5
S L O T – 0 6
S L O T – 0 7
S L O T – 0 8
S L O T – 0 9
S L O T – 1 0
R
R
R
R
R
R
R
R
R
R
M A S T E R
R E T U R N U S E R M O D E ?
Y E S N O
• When “MANUAL” is selected, searching will be set for each slot.
Use the CURSOR or button to select the input slot
number of the Switcher and press ENTER.
• The “SIGNAL FORMAT” menu will be displayed.
Use the CURSOR or button to select “RGB” or “COM-
PONENT” and press ENTER.
Items to select
•
RGB ..................... Searches RGB signals only.
•
COMPONENT ....... Searches COMPONENT signals only.
When used with two or more Switchers ISS-6020/ISS-6020G:
Items to select
•
MANUAL ....... Searches RGB or COMPONENT signals only
( for each slot).
•
AUTO ............. Searches COMPONENT signals automatically
after searching RGB signals ( for all slots).
• When “MANUAL” is selected, searching will be set for each
slot.
Use the CURSOR or button to select the master slot
number “1” through “10” first from the master menu, then select
the slave slot number “1” through “10” from the slave menu and
press ENTER.
• The “SIGNAL FORMAT” menu will be displayed.
Use the CURSOR or button to select “RGB” or “COM-
PONENT” and press ENTER.
Items to select
•
RGB ..................... Searches RGB signals only.
•
COMPONENT ....... Searches COMPONENT signals only.