NEC MultiSync XG-1352C, Руководство по установке

Страница: 25 / 142

25
S L O T – 0 1
S L O T – 0 2
S L O T – 0 3
S L O T – 0 4
S L O T – 0 5
S L O T – 0 6
S L O T – 0 7
S L O T – 0 8
S L O T – 0 9
S L O T – 1 0
M A S T E R
When using with a single Switcher ISS-6020/ISS-6020G:
Use the CURSOR
or button to select the input slot number
of the Switcher and press ENTER.
• Input slot numbers are from 1 through 10.
Use the CURSOR or button to select “VIDEO”, “RGB”,
“S-VIDEO” or “COMPO.” and press ENTER.
• The “NAME INPUT” screen will be displayed.
Items to select
• VIDEO --------- Selects the signal from the VIDEO input
terminal of the VIDEO input board.
• RGB ----------- Selects the signal from the RGB input terminal
of the RGB input board.
• S-VIDEO ------ Selects the signal from the S-VIDEO input
terminal of the VIDEO input board.
• COMPO. ------ Selects the signal as COMPONENT signal from
the RGB input terminal of the RGB input board.
* Go on to Step 2).
NOTE:
Signal registry is not possible unless the installed input
board matches the selected signal. Check the installed input
board and the slot number.
V I D E O
R G B
S - V I D E O
C O M P O .
SIGNAL ENTRY