NEC MultiSync XG-1352C, Руководство по установке

Страница: 45 / 142

45
ADJUSTMENT
Electrical Focus Adjustment
– A D J U S T –
1 / S I G N A L E N T R Y
2 / F O C U S
3 / A L I G N M E N T
4 / C O N V E R G E N C E
5 / K E L V I N
6 / R , G , B G A I N
7 / P A S S C O D E
8 / O P T I O N
9 / R E F . A D J U S T
Adjust the focus electrically to obtain the best screen focus.
NOTE:
• The adjustment must be done to each input.
• Select the FOCUS test pattern using the TEST button on the full
function remote control.
Proceed as follows:
1
Press the ADJUST button to display the “ADJUST” menu.
• The projector may ask you to enter your passcode.
See page 68 for the explanation of the PASS CODE.
2
Use the CURSOR or button to highlight the “2/FOCUS”
line. Press ENTER to display the FOCUS menu. You can also
select the FOCUS menu directly by pressing the INPUT “2”
button.
3
Use the CURSOR or button to highlight your preferred
adjustment item. Press ENTER to display the selected adjustment
screen.
• You can also select the adjustment screen directly by pressing
the INPUT “1” through “4” button.
• For edge focus, you can select either “EDGE ALL” or “EDGE
SEPA.” in the FOCUS EDGE mode of the OPTION menu.
(See page 82).
Items to select
• CENTER ......... The focus adjustment for the center of the
screen (each CRT).
• EDGE ALL ...... The focus adjustment for the edge area of the
screen (all CRTs).
• EDGE SEPA. .. The focus adjustment for the edge area of the
screen (each CRT).
• CORNER. ....... The focus adjustment for the corner of the
screen (each CRT).
NOTE:
• The adjustment screen can also be displayed by pressing the
FOCUS button on the full function remote control. The FOCUS
button rotates the adjustment screen in the above order.
– F O C U S –
1 / C E N T E R
2 / E D G E A L L
3 / E D G E S E P A .
4 / C O R N E R