NEC MultiSync XG-1352C, Руководство по установке

Страница: 31 / 142

31
m
When selecting “DATA COPY”
To help assist in adjusting multiple inputs this projector has a
feature called DATA COPY. This feature allows you to copy the
memory data from one input to another input. By copying this
data from an input that has already been adjusted to an existing
input you will not have to do a complete adjustment.
To do this, proceed as follows:
1) Use the CURSOR or button to select “DATA COPY”
and then press ENTER.
• The “DATA COPY SELECT SOURCE” message will be
displayed at the bottom of the screen.
2) Use the CURSOR or button to select the signal to copy
from and then press ENTER.
• The “DATA COPY SELECT DESTINATION” message
will be displayed at the bottom of the screen.
3) Use the CURSOR or button to select the signal you wish
to copy to and press ENTER.
• The “DATA COPY MODE” menu will be displayed.
Use the CURSOR or button to select an item and press
ENTER.
Items to select
• ALL ................................... Copies all the settings.
• EXCEPT H-POSI&PHASE .. Copies the settings except H-
position and Phase adjustments
data.
• When “GAIN DATA COPY END” message will be displayed,
this completes the DATA COPY mode.
• The “SIGNAL ENTRY” list will be displayed. Go on to Step
5
m
When selecting “CHANGE DEFAULT”
All of the adjustment data of the selected signal will be stored in
the DEFAULT AREA.
The data stored in the DEFAULT AREA can be recalled by
pressing the NORMAL button.
Selecting “DEFAULT” from the “INITIAL DATA SELECT”
menu during signal entry will utilize the data stored in the
“DEFAULT AREA”.
NOTE: The default area is comprised of six locations depending
on the horizontal frequency. The adjustment data will be stored in
one of these locations corresponding its horizontal frequency. To
refer the current default area, see "DEFAULT DATA" of the
OPTION menu on page 128.
To do this, proceed as follows:
S I G N A L E N T R Y
N E W E N T R Y
E N T R Y C O P Y
E N T R Y M O V E
E N T R Y D E L E T E
D A T A C O P Y
C H A N G E D E F A U L T
S O U R C E E D I T
P01/10-1
DATA COPY SELECT SOURCE
STANDALONE
NO
0 2
0 3
0 4
0 5
0 6
0 7
0 8
0 9
NAME
PAL
VGA480
NTSC
SOURCE
VIDEO
RGB
S-VIDEO
INPUT
A
A
A
SIGNAL ENTRY
0 1 NTSC3.58 VIDEO A
1 0
S I G N A L E N T R Y
N E W E N T R Y
E N T R Y C O P Y
E N T R Y M O V E
E N T R Y D E L E T E
D A T A C O P Y
C H A N G E D E F A U L T
S O U R C E E D I T
SIGNAL ENTRY
DATA COPY MODE
ALL
EXCEPT H-POSI & PHASE