NEC IE-784000-R, Руководство пользователя

Страница: 83 / 113

83
CHAPTER 9 SETTING NETWORK INFORMATION
9.2 Setting by Software
9.2.1 Connecting equipment
To set the network information by software, the equipment must be set as follows:
<1> Confirm that the IE-78000-R-SV3 is connected to the setting window.
<2> Connect channel 1 of the IE-784000-R and terminal with the RS-232C cable supplied as an accessory (for the
setting of RS-232C, refer to Table 9-1).
<3> Connect the IE-ETHER cable supplied as an accessory to channel 3 of the IE-784000-R (the other side of the
cable may be left open).
<4> When power is turned on, the menu shown in Fig. 9-1 will be displayed.
Table 9-1 Setting of RS-232C (factory-set condition)
Baud rate 9600 bps
Character 8 bits
Parity bit None
Stop bit 2 bits
Modem/terminal Modem
Fig. 9-1 Menu Screen
IE-SV VX.XX [XX/XX/XX]
--- SETUP NETWORK INFORMATION -------------------------------
1.LOCAL ETHERNET ADDRESS XXXXXXXXXXXX
2.LOCAL IP ADDRESS XXXXXXXX
3.LOCAL HOST NAME XXXXXXXXXXXXXXXX
4.LOCAL PORT NO. XXXX
5.REMOTE ETHERNET ADDRESS XXXXXXXXXXXX
6.REMOTE IP ADDRESS XXXXXXXX
7.REMOTE HOST NAME XXXXXXXXXXXXXXXX
8.REMOTE PORT NO. XXXX
9.ROUTER ADDRESS XXXXXXXX
10.SUBNET ADDRESS MASK XXXXXXXX
11.EXIT
-------------------------------------------------------------
FUNCTION NO. > XX