NEC IE-784000-R, Руководство пользователя

Страница: 90 / 113

CHAPTER 9 SETTING NETWORK INFORMATION
90
<Meanings of LEDs and switches>
• LED1
Indicates the position (pointer) of the data displayed on LED2.
0 to 7 (decimal point remains dark) : IP address
0. to 3. (decimal point lights) : port No.
<1> Indication of LED1 (with decimal point remaining dark)
<2> Indication of LED1 (with decimal point lighting)
• LED2
Indicates the value of data indicated by LED1 (hexadecimal indication).
• SW1
<1> Sets the network information setting mode when power is turned ON while this switch is held down.
<2> Writes data to the buffer. (Press this switch once. The LED will blink once.)
<3> Writes the buffer contents to the EEPROM (Hold down this switch for about 2 seconds. The LED will
blink two times.)
• SW2
Increments the value indicated by LED1.
The value indicated by LED1 is successively incremented while this switch is held down.
(Incrementing value indicated by LED1)
→
0
→
1
→
2
→
3
→
4
→
5
→
6
→
7
→
0.
→
1.
→
2.
→
3.
#31-28 #27-24 #23-20 #19-16 IP address #15-12 #11-8 #7-4 #3-0
#15-12 #11-8 #7-4 #3-0 Port No.