5. Setup for Solving Problems
Express5800/R320c-E4, R320c-M4, R320d-E4, R320d-M4 Installation Guide (Windows)
188
Chapter 1 Installing Operating System
12. In
Paging file size for each drive
, enter the value equal or larger than the recommended value for
Initial size
, and the value larger than
Initial size
for
Maximum size
, and then click
Set
.
Note the following when specifying a paging file size:
–
The boot volume (usually created in drive C:) must have a paging file of its initial size (Total capacity
of physical memory m 400MB or larger) is enough to store the dump file. Specify "Total
capacity of physical memory m 400MB" or larger size.
–
Make sure to specify a sufficient paging file size (recommended size: Total capacity of physical
memory mounted * 1.5 or more) for entire system.
–
See "System Partition" in
Chapter 1
(
3.1 Before Starting Setup
) for recommended value.
–
When DIMM is added, re-specify the paging file according to the increased memory size.
13. Click
OK
.
14. If a message to restart Windows appears, restart the system according to on-screen message.
Specification of the memory dump settings is now complete.