![background image](http://html1.mh-extra.com/html/nec/express5800-r320c-e4-n8800-173f/express5800-r320c-e4-n8800-173f_installation-manual_4200244170.webp)
4. Setting Up Windows Server 2008 R2
Express5800/R320c-E4, R320c-M4, R320d-E4, R320d-M4 Installation Guide (Windows)
170
Chapter 1 Installing Operating System
4. On the left pane of the RDR Utility, right click on the
Slot 1
disk of
PCI Module 10
and select
Create
RDR Virtual Disk
.
Tips
Depending on the disk condition, RDR setting may take some time and RDR Utility may
pause for a few minutes. There is no error, so wait until the process is completed.
5. Click
Yes
.
6. Click
OK
.
Important If RDR is specified to a disk which contains the system partition or partition which
cannot be unmounted, the system restart pop-up message appears. If you click Yes,
the system is restarted in two minutes automatically. Go on to Step 8. when the
system is restarted.
7. Insert the disk to set dual configuration into the slot 1 of PCI module 11, and perform the Step 2.
If a hard disk drive is already mounted, this procedure is not necessary. Perform the Step 2 only.
Important For a disk to be inserted, use a new or physically formatted disk which has the same
capacity as the synchronization source. If such a disk is not used, disks are not
duplicated successfully.
As for physical format, refer to
Chapter 3 (2. SAS Configuration Utility)
in
Maintenance Guide
.