![background image](http://html1.mh-extra.com/html/nec/express5800-r320c-e4-n8800-173f/express5800-r320c-e4-n8800-173f_installation-manual_4200244190.webp)
5. Setup for Solving Problems
Express5800/R320c-E4, R320c-M4, R320d-E4, R320d-M4 Installation Guide (Windows)
190
Chapter 1 Installing Operating System
6. Specify the folder to store the debug information in the
Dump file:
text box and click
OK
.
Example: To store the debug information in D drive under the file name
MEMORY.DMP
:
Note the following when specifying a dump file.
–
For the
Write debugging information
drop-down list, we recommend specifying
Complete
memory dump
. If the mounted memory size is greater than 2 GB, however,
Complete memory
dump
cannot be specified because it is not displayed on the drop-down list. In this case, specify
Kernel memory dump
instead.
–
Specify a drive that has a free space of at least "the memory capacity mounted on the 300
MB".
–
The size of the debug information (memory dump) to be collected changes if memory is added. Make
sure that the free space of the drive to store the debug information (memory dump) is sufficient. If you
attempt to add memory that will cause the mounted memory size to exceed 2 GB, specify Kernel
memory dump.
–
Do not remove checkmark (uncheck) from
Automatically restart
check box.