4. Setting Up Windows Server 2008 R2
Express5800/R320c-E4, R320c-M4, R320d-E4, R320d-M4 Installation Guide (Windows)
129
Chapter 1 Installing Operating System
20. When
ft Server Setup list
appears, confirm the list items.
Provide setup for the item which is unchecked.
Install Options (LAN, SAS, Fibre Channel Board)
If you have an option board that is not yet installed, install it according to
Chapter 2 (5.7 PCI Card)
in
Maintenance Guide
.
Update Software
See Chapter 1 (4.8.1 Applying ft Server Control Software Update Module).
Apply Windows Service Pack
See
Chapter 1 (4.7 Applying Service Pack)
.
Service Pack 1 is applied if you use the OS install media containing Service Pack 1.
Configure duplex LAN
See
Chapter 1 (4.9 Duplex LAN Configuration)
.
Configure dual Disk
See
Chapter 1 (4.10 Configuring Duplexed Disks)
.
Create Volume
See
Chapter 1 (4.11 Creating Volume)
.
Change setting of SNMP service for NEC ESMPRO Agent
As described in
Chapter 2 (1.1 NEC ESMPRO Agent (for Windows),
setup SNMP service by referring to
NEC ESMPRO Agent Installation Guide (Windows)
.
Enable OS Boot Monitoring
See
Chapter 1 (4.13 Enabling OS Boot Monitoring Feature)
.
Setup for Solving Problems
See
Chapter 1 (5. Setup for Solving Problems)
.
Tips
If necessary, perform license authentication procedure according to
Chapter 1 (4.14
License Authentication)
.
Back up System Information
See
Chapter 1 (7. Backing Up System Information)
.
Setup with EXPRESSBUILDER is now complete.