Upgrading Your System 4-19
A. PHP LED board
B. EPHP
mechanism
C. EPHP
actuator
D. EPHP mechanism, open position
Figure 4-10. Enhanced PHP Functionality on Add-in Board Slots
3.
Being careful not to touch the components or gold edge connectors on the
add-in board, remove it from the protective wrapper, and place it
component-side up on a nonconductive, antistatic surface.
4.
Record the serial number of the board in your equipment log
5.
Set any jumpers or switches according to the board manufacturer’s
instructions.
6.
If your server is not operating, skip this step. If your server is operating:
!
Access the PCI hot-plug utility on the CD-ROM that came with your
server.
!
Use the PCI hot-plug utility to power down the appropriate PCI slot.
7.
Press the EPHP mechanism on the actuator (C), then rotate the mechanism
to free the PCI board from its connector. See Figure 4-10
8.
Remove the I/O slot filler panel for the appropriate slot.
9.
Grasp the board by the top edge or upper corners, and firmly press it into an
expansion slot on the PHP I/O carrier (see Figure 4-11). The tapered foot of
the processor retaining bracket must fit into the mating slot in the expansion
slot frame.
10.
Secure the add-in board to the expansion slot frame using the power
enabling switch actuator (rotate the EPHP mechanism back into place) and
expansion slot cover retaining screw.
OM08752
D
C
B
A
Содержание Express5800/180Rb-7
