NEC Express 5800/320Lb-R Скачать руководство пользователя страница 279

Страница: 279 / 302

8-37

Installing PCI Board

Follow the procedure below to install the board to be connected to the PCI board slot.

TIPS:

To install the PCI board, make sure the shape of the board connector matches with the

shape of the PCI board slot connector.

114.

Remove the PCI module.

115.

Remove the PCI module’s top cover.

116.

Identify the slot to which you want to install a PCI board and remove the connector cap.

IMPORTANT:

Carefully keep the removed connector cap.

117.

To install a long card, loosen the setscrew, slide the bracket, and secure it with the
setscrew.

118.

Pull the PCI board retainer bracket from the inside.

Unscrew the setscrew of the additional slot cover at the same position (level) as the target
slot, and remove the slot cover.

IMPORTANT:

Carefully keep the removed additional slot cover.

Screw

Bracket

Additional slot cover

PCI board retainer
bracket

Содержание Express 5800/320Lb-R















































































































































































































































































































Результаты поиска

Содержание Express 5800/320Lb-R

Отзывы:

NEC Express 5800/320Lb-R, Руководство пользователя, Страница: 279 / 302

Результаты поиска

Содержание Express 5800/320Lb-R

Отзывы: