NEC Express 5800/320Lb-R Скачать руководство пользователя страница 244 | Manualshive

Страница: 244 / 302

NEC Express 5800/320Lb-R Скачать руководство пользователя страница 244

8-2

SAFETY PRECAUTIONS

Observe the following notes to install or remove optional devices safely and properly.

WARNING

Observe the following instructions to use the server safely. There are risks of
death or serious personal injury. See PRECAUTIONS FOR SAFETY in
Chapter 1 for details.

•

Do not disassemble, repair, or alter the server.

•

Do not look into the CD-ROM drive.

•

Do not remove the lithium battery.

•

Disconnect the power plug before working with the server.

CAUTION

Observe the following instructions to use the server safely. There are risks of
fire, personal injury, or property damage. See PRECAUTIONS FOR SAFETY
in Chapter 1 for details.

•

Do not install or remove components by a single person.

•

Do not install the server leaving the cover removed.

•

Make sure to complete component installation.

•

Do not pinch your finger(s).

•

High temperature

«
...
242
243
244
245
246
...
»

Содержание Express 5800/320Lb-R















































































































































































































































































































Отзывы:

Нет отзывов