NEC Bull NovaScale R620 Series Скачать руководство пользователя страница 93 | Manualshive

Страница: 93 / 97

NEC Bull NovaScale R620 Series Скачать руководство пользователя страница 93

NovaScale R620-LR / R620-MR Setup Guide

The event log below is recorded after executing Express Setup:

Source

:

HASSETUP

Type

:

Error

Event ID

: 201

Description

: HASSETUP: The module in one side is not recognized.

→

GeminiEngine Control Software is not properly installed because one of the CPU/IO modules could not be
recognized during its installation. The possible reasons are:

One of the CPU/IO modules is not mounted. (The screws that fix the removable handle of the CPU/IO
module are not fastened properly, or the power is not supplied.)

The CPU/IO module is faulty.

Take necessary actions such as checking the device status and mounting the CPU/IO module. Then,
reinstall GeminiEngine Control Software with both CPU/IO modules mounted and the power supplied.
For more information about installing procedure, see “Installing GeminiEngine Control Software”
(page 6-11).

The event log below is recorded when starting the system, or the message “!ILLEGAL FILE” is displayed when
logged on as a user who performed the installation.

Source

:

HASSETUP

Type

:

Warning

Event ID

: 101

Description

: Some GeminiEngine Control Software files have been illegally updated in the system.

→

Files of GeminiEngine Control Software installed on the system are updated to incorrect files. Refer to
“Installing GeminiEngine Control Software” (page 6-11) and reinstall GeminiEngine Control Software.

→

If the “ILLEGAL FILE” message is displayed or only “adpu320.sys” is listed as invalid files in the event
log, the SCSI driver file has been updated for some reason. In such a case, reinstallation of the entire
GeminiEngine Control Software is not required. You only need to install the SCSI driver. For how to install
it, refer to "SCSI Board" of the “Setup of Optional PCI Board” (page 8-38) in the separate User’s Guide.

If only “FC” is displayed as the component name, it may be that the dedicated driver has not been installed
when the Fibre Channel board was mounted. See “Fibre Channel Board Set” of “Setup of Optional PCI
Board” (page 8-39) in the separate User’s Guide.

6-17

«
...
91
92
93
94
95
...
»

Содержание Bull NovaScale R620 Series


































































































Отзывы:

Нет отзывов