NEC Bull NovaScale R620 Series, Руководство по установке, Страница: 45 / 97

NovaScale R620-LR / R620-MR Setup Guide
Setup Procedures
Express Setup configures the settings for each of the parameters in the Wizard form. You can also save each of the
parameters as one file (parameter file) to a floppy disk.
CHECK:
To execute Express Setup with a parameter file, one empty 1.44 MB formatted floppy disk is required. Prepare
an empty floppy disk in advance.
When you reinstall OS, you can skip entering the parameter in the Wizard form, by reading the parameter file
that has been saved.
Also, during Express Setup, to individually apply the attached driver FDs (OEM-FD for high-capacity storage),
it is necessary to configure the parameter file settings as well. You also need to prepare an empty floppy disk
for this purpose.
IMPORTANT:
In case of changing the system configuration, update the system (page 6-7).
1. Turn on the peripherals and then NovaScale/ft Server series.
TIPS:
Install the OS before connecting a hard disk drive other than the one to which you install OS.
2. Insert the EXPRESSBUILDER CD-ROM into the CD-ROM drive of the server.
3. When having inserted the CD-ROM correctly, reset the system (press Ctrl , Alt and Delete together), or turn the
power off and then turn it on to restart the NovaScale/ft Server series.
The system starts from the CD-ROM, and EXPRESSBUILDER is activated.
4.
Click [Express Setup].
5. The message, [Do you want to use the parameters file in order to set
up the server or workstation?] is displayed. In case of using the
parameter file, click [Yes]. In case of not using, select [No].
Do you want to use the parameters file
in order to set up the server or
workstation?
No Yes
6. [NOTE] is displayed. Read the displayed contents
carefully and click [Confirm].
NOTE
We recommend you that you should save the information
proper to your system after system setup. If not, you will not be
able to recover the information. You can save the information
by the following process.
(1) Select ‘Tools’. (2) Select ‘Off-line Maintenance Utility
(3) Select ‘System Information Management’.
(4) Select ‘Save’.
Confirm
4-13