NEC Bull NovaScale R620 Series Скачать руководство пользователя страница 5

Страница: 5 / 97

NovaScale R620-LR / R620-MR Setup Guide

Symbols and its descriptions used in this User’s Guide and warning labels are as follows:

Attention

Indicates a risk of an electric shock.

Indicates a risk of a personal injury due to heat.

Indicates a risk of catching your fingers.

Indicates a risk of a fire or smoke.

Indicates a general precaution or warning that is not defined herein.

Indicates a risk of losing eyesight due to laser beam.

Indicates a risk of an explosion.

Indicates a risk of a personal injury.

Prohibited actions

Indicates a general prohibition that is not defined herein.

Do no touch the indicated area. There is a risk of an electric shock or fire.

Do not touch with wet hands. There is a risk of an electric shock.

Keep from flame. There is a risk of a fire.

Avoid using water or liquid nearby. If it spills on the equipment, there is a risk of an
electric shock or fire.

Do not disassemble, repair, or modify the equipment. There is a risk of an electric
shock or fire.

Mandatory actions

Unplug the server. There is a risk of an electric shock or fire.

Indicates a general action to take that is not defined herein. Make sure to follow the
instructions.

For detailed notes to set up the machine safely, refer to “NOTES FOR SAFE HANDLING” on page 1-2.

Содержание Bull NovaScale R620 Series


































































































Результаты поиска

Содержание Bull NovaScale R620 Series

Отзывы:

NEC Bull NovaScale R620 Series, Руководство по установке, Страница: 5 / 97

Результаты поиска

Содержание Bull NovaScale R620 Series

Отзывы: