NEC Bull NovaScale R620 Series, Руководство по установке, Страница: 89 / 97

NovaScale R620-LR / R620-MR Setup Guide
Problems with Windows Setup
The following message is displayed when the setup starts.
The specified disk is not found. Terminating SW
→
The disk to install the system is not connected properly. Check if the hardware is properly installed and
connected.
The following message is displayed while copying files from CD-ROM.
xxxxx : Not Ready xxxxxxxxxxxxxxxxxxZ
xxxxx(A), xxxxx(R), xxxxx(F)
→
Press R . If this message still appears, perform the setup again. If the error persists, contact your sales agent
to examine the CD-ROM drive.
Failed to setup in detail for network adapter.
→
The detailed setup of network adapter is not available in setup of NovaScale/Fault Tolerant Server series.
Open the control panel after starting Windows Server 2003 to configure the network adapter.
Failed to install Windows Server 2003 correctly.
†
Have you checked instructions and information on installation?
→
See “Step 1: Things Required for Setup” (page 4-4) and “Step 2: Prepare for Express Setup” (page 4-6).
Rebooted during the setup.
→
See “Step 3: Disable Boot Monitoring Function” (page 4-9), and set the parameter of this machine’s boot
→
t
trol
e latest version of its GeminiEngine Control Software UPDATE CD-ROM,
contact your sales agent.
During a
→
+
Alt
e operated after a setup but each module or PCI board is not duplicated. (FT Status LED does not
light e
†
?
→
“Step 1: Things Required for Setup” needs to be done from the beginning.
DISK cc
†
→
he indication status of LED.) See “Step 6: Set Dual Disk Configuration” and set up
the duplex of HDDs.
monitoring function to correct value.
GeminiEngine Control Software UPDATE CD-ROM is not included.
GeminiEngine Control Software UPDATE CD-ROM is used to update GeminiEngine Control Software; i
may not be shipped with the equipment. (Not included if “EXPRESSBUILDER” CD-ROM contains the
latest version of software programs at the time of shipment). For the latest release of GeminiEngine Con
Software and purchase of th
setup, “Previous Operating System C:” was selected on a selection screen of the operating system.
The process will be stopped along the display of DOS prompt or black screen. In this case, press
Ctrl
+
Delete
, or turn off the power to reboot the system. Installation will be continued after a reboot.
Windows can b
gre n).
Did you abort the installation during a setup such as by closing a window of the programs that are running
Installation will be aborted if you finish the programs that are running such as by closing a window.
Although the operation on Windows will be feasible, PCI boards will not be duplicated properly if you abort
the installation. In this case,
A ess LED will light amber.
Did you properly setup the duplex of HDDs?
DISK Access LED will light amber, if a setup for duplex is not performed. (See “LEDs” in the separate User
Guide for details about t
6-13