NEC Bull NovaScale R620 Series, Руководство по установке, Страница: 79 / 97

NovaScale R620-LR / R620-MR Setup Guide
(b) Log on to the Recovery Console, and execute the following command.
(The default is FALSE)
set AllowRemovableMedia = TRUE
IMPORTANT:
„ The dynamic disk can be written from the Windows Server 2003 Recovery Console once the setting shown
above is made.
„
By default, the Windows Server 2003 Recovery Console is not allowed to write data from the basic/dynamic
disk to a floppy disk. It becomes however possible once the setting shown above is made (copy, access).
Default setting:
Write (copy, access) Basic disk Dynamic disk
Copy From Copy To
access destination
HDD HDD Copy available Copy not available
FD HDD Copy available Copy not available
CD HDD Copy available Copy not available
CD FD Copy not available Copy not available
HDD FD Copy not available Copy not available
After the setting:
Write (copy, access) Basic disk Dynamic disk
Copy To
Copy From
access destination
HDD HDD Copy available Copy available
FD HDD Copy available Copy available
CD HDD Copy available Copy available
CD FD Copy available Copy available
HDD FD Copy available Copy available
Note: HDD : Hard disk (SystemDrive, SystemRoot only)
FD : Floppy disk
CD : CD-ROM
Preparation
You need a support disk, “Windows Server 2003 OEM-DISK for EXPRESSBUILDER” to start up the Recovery Console.
Have “Windows Server 2003 OEM-DISK for EXPRESSBUILDER” ready before starting the Recovery Console.
If you do not have a computer that runs Windows Server 2003 or Windows 2000/XP/NT.
Follow the steps below to create a “Windows Server 2003 OEM-DISK for EXPRESSBUILDER”:
1. Prepare a 3.5-inch floppy disk.
2. Power on the peripherals and then NovaScale/Fault Tolerant Server series.
3.
Disable the configuration for boot monitoring function.
In the BIOS setup, select [Server] - [Monitoring Configuration] - [Boot Monitoring] and choose “Disabled.”
See “Step 3: Disable Boot Monitoring Function” (page 4-9) for details.
6-3