NEC Bull NovaScale R620 Series, Руководство по установке, Страница: 84 / 97

NovaScale R620-LR / R620-MR Setup Guide
Updating the System
IMPORTANT:
NovaScale/Fault Tolerant Server series is a precision instrument. You should ask maintenance personnel to update
the system.
You will need to update the system after you repair the system using Recovery Console.
IMPORTANT:
„
Make sure to follow the steps below when you have restored the system by using Recovery Console.
„
Check the configuration for boot monitoring function.
If [Boot Monitoring] selected in [Monitoring Configuration] of [Server] is not set to “Disabled”, disable it. See
“Step 3: Disable Boot Monitoring Function” (page 4-9) for details.
„ When updating the system, considerations on the Power and Screen Saver settings are required.
If the following settings are enabled when updating the system, the process may stop or the system update may
not be applied properly. Disable the settings by clearing the checkboxes before updating the system. Reconfigure
the following settings as necessary afterwards.
- Settings of Screen Saver
- Power Schemes (Turn off monitor, Turn off hard disks)
- Hibernation (enable Hibernation)
1. Log on to the system with OS installed as user with Administrative account.
IMPORTANT:
Check that the dual system is configured properly (Check that the FT STATUS LED on the front panel of
the server lights green. See page 4-7 for location of the STATUS LED).
2. Remove duplications of all the LANs for both onboard and option boards.
When dual LAN is disabled, a setup of LAN will be deleted. Note down the setup information.
(a) Start Device Manager.
(b) Select the team adapter that you want to cancel duplication, and select [Properties] from the menu displayed
by right-click, to display the Properties window.
6-8