NEC Bull NovaScale R620 Series, Руководство по установке, Страница: 78 / 97

NovaScale R620-LR / R620-MR Setup Guide
SYSTEM REPAIR
If the system cannot be operated for some reason, use Recovery Console to restore the system. However, this method is
only recommended to users or administrators who have good knowledge of the system.
When you have restored a damaged file by using Recovery Console, always update the system as described later in this
chapter.
IMPORTANT:
If hard disks cannot be recognized, the system cannot be repaired.
Cautions for using the Windows Server 2003 Recovery Console
To use the Recovery Console in a system where the system disk is a dynamic disk, the following settings need to be
configured beforehand.
If these settings are not done, the files on the hard disk cannot be updated on the Recovery Console, and the message
“Access is denied” appears.
1.
“Local Security Policy” setting
IMPORTANT:
This setting should be made in advance on the Windows Server 2003.
(a) Start Windows Server 2003, and log on as a user with the administrator authority.
(b) From the Start menu, select [Administrative Tools] and select [Local Security Policy].
(c) Select [Local Policies] and then select [Security Options] in the left pane of the [Local Security Settings] window.
(d) Double-click [Recovery console: Allow floppy copy and access to all drives and all folders] in the right pane, and
enable the Security Setting.
2. Environment variable “AllowRemovableMedia” setting
IMPORTANT:
This setting is made on the Windows Server 2003 Recovery Console when the Windows Server 2003 Recovery
Console is in use. This should be set every time the Recovery Console is started.
(a) Start the Windows Server 2003 Recovery Console.
For how to start the Recovery Console, see “Preparation” (page 6-3) and “Starting up Recovery Console” (page
6-5).
6-2