NEC Bull NovaScale R620 Series, Руководство по установке, Страница: 81 / 97

NovaScale R620-LR / R620-MR Setup Guide
Starting up Recovery Console
You can start up Recovery Console in two ways:
„
Start up Recovery Console installed on the system.
„ Start up Recovery Console from the Windows Server 2003 CD-ROM.
„
Installing Recovery Console on the system
1.
Start up the NovaScale/Fault Tolerant Server series and log on to Windows Server 2003.
2. Insert the Windows Server 2003 CD-ROM into the drive.
3.
From [Start] of the taskbar, select [Run...] to run.
CD-ROM drive:\i386\winnt32.exe /cmdcons /syspart:c: /tempdrive:c:
4. Follow the messages that appear on the screen to continue.
„
Starting up the Recovery Console
1. Disable the boot monitoring function.
Select [Server] - [Monitoring Configuration] - [Boot Monitoring] and choose “Disabled”.
See “Step 3: Disable Boot Monitoring Function” (page 4-9) for details. .
2.
Power on the system.
<When starting up Recovery Console installed on the system>
(a) Select Microsoft Windows Recovery Console in “Please select the operating system to start:”
Please select the operating system to start:
Windows Server 2003, Enterprise
Microsoft Windows Recovery Console
(b) When the following message appears on the screen press
F6
quickly.
<When starting Recovery Console from Windows Server 2003 CD-ROM>
(a) Insert the Windows Server 2003 CD-ROM into the drive.
(b) When the CD is set, reset the system (press Ctrl + Alt + Delete ) or press the power switch to power off
and on to reboot the NovaScale/Fault Tolerant server series.
(c) When the following message appears, press any key to start up from the CD-ROM.
IMPORTANT:
Press any key while the message is displayed. Otherwise the system will be started up from a
hard disk and Recovery Console will not be started.
(d) When the following message appears on the screen, press F6 quickly.
6-5