NEC Bull NovaScale R620 Series, Руководство по установке, Страница: 58 / 97

NovaScale R620-LR / R620-MR Setup Guide
Step 10: Creating Volume
For NovaScale/ft Server series, you need to create mirrors for all volumes. In case of creating a new volume except for
th
ores the system partition, see “Hard Disk Configurations that can be built on the NovaScale/ft Server
se separate User Guide.
F ”
(p
e one that st
ries”in the
or how to create or mirror volume, see the Online Help of Windows and “Step 7: Setting Dual Disk Configuration
age 4-22).
IMPROTANT:
The creation of volume is available after the system opeation is started.
For creating volume, refer to “Hard Disk Configurations that can be built on the NovaScale/ft Server series” in the
separate User’s Guide.
S
er series. It is automatically installed
o operate ESMPRO Agent, you need to set the SNMP.
ttings of the SNMP Service:
el].
3. Select [SNMP Service] from the service list and then [Properties] in the [Action] menu.
The “SNMP Properties” dialog box appears.
in the [Community name] box in the [Traps] property sheet and click the [Add to list] button.
tep 11: Setting Network for ESMPRO Agent
ESMPRO Agent is required for continuous operation of the NovaScale/ft Serv
when installing OS using Express Setup.
T
To change the se
1. Double-click [Administrative Tools] in [Control Pan
2. Open [Services] in [Administrative Tools].
4. Enter “public”
IMPORTANT:
„
To change the community name of traps to be received from the default “*” in the ESMPRO Manager
site, enter the same name as the community name newly set in the ESMPRO Manager site.
„
To receive trap from ESMPRO Agent at the ESMPRO Manager machine, both community names
should be the same.
5. Click the [Add...] button in [Trap destinations]. After entering the IP address of the ESMPRO Manager
machine of the send destination in the [Host name, IP or IPX address] box, click the [Add] button.
IMPORTANT:
If the IP address (or host name) of the remote ESMPRO Manager specified as the trap
send destination in the setup of the manager report (TCP/IP), the message warning the duplication appears.
The specification of the same ESMPRO Manager causes to be reported doubly.
6. Open the [Security] property sheet and make settings as follows:
•
Add the community name entered in 4 to [Accepted community names].
•
Set its authority to [READ CREATE] or [READ WRITE].
•
Select [Accept SNMP packets from any host].
IMPORTANT:
„
If you entered any community name other than “public” in 4, add that name to “Accepted community
names”.
„
Unless you set the acceptable community’s authority to “READ CREATE” or “READ WRITE,” you
cannot perform monitoring from ESMPRO Manager.
4-26