NEC Bull NovaScale R620 Series Скачать руководство пользователя страница 87 | Manualshive

Страница: 87 / 97

NEC Bull NovaScale R620 Series Скачать руководство пользователя страница 87

NovaScale R620-LR / R620-MR Setup Guide

Installing GeminiEngine Control Software

Install the GeminiEngine Control Software.

IMPORTANT:

Terminate all programs before starting the installation.
You must terminate all the programs because the software will not be installed successfully, especially when the
Microsoft management console is running.

The LAN settings will be deleted during the installation. Write down these settings to reset the parameters after
the installation as necessary.

Remove the dual LAN configurationbefore starting the installation.

1.

Follow the steps below to install GeminiEngine Control Software.

a)

After logging on to the system as a user with the Administrative account, insert the
“EXPRESSBUILDER” CD-ROM into the CD-ROM drive of the server.

b)

When the “Master Control Menu” screen appears, click [Setup] and select [GeminiEngine Control
Software] on the menu.

Follow the instructions to proceed with the installation. The message “GeminiEngine Control Software, Now
Installing... Please Wait.” is displayed while GeminiEngine Control Software. Do not use the keyboard or mouse
while this message is being displayed.

2.

The system is rebooted during the installation.

The system is rebooted several times during the installation. Remove the CD from the CD-ROM drive once
rebooting is started.

After the system is rebooted, log in again as the user logged in before rebooting. Installation of the GeminiEngine
Control Software is continued.

3.

The message “Installation finished.” is displayed.

Once installation is completed, the message “Installation finished.” is displayed and the rebooting starts.

Use the “GeminiEngine Control Software UPDATE CD-ROM” to update GeminiEngine Control Software:
After installing the GeminiEngine Control Software, follow the procedure on the setup card attached to the
“GeminiEngine Control Software UPDATE CD-ROM” and apply the update.

6-11

«
...
85
86
87
88
89
...
»

Содержание Bull NovaScale R620 Series


































































































Отзывы:

Нет отзывов