Neatech EVO3 Скачать руководство пользователя страница 71 | Manualshive

Страница: 71 / 93

Neatech EVO3 Скачать руководство пользователя страница 71

www.neatech.it

71

5.3

Software

The software of the wheelchair can be classified into these classes:



Kernel Software of the Rnet System.

There is no required access, modification or customization of this part of the software.

In the case a reprogramming of the wheelchair is required, please contact
the manufacturer to have instructions and the most suitable version of the
software.

In case of problems with this part of the software please contact the
manufacturer.



Firmware of the Neatech Sensor Board (advanced seating module)

This part of the software is intended to interface sensors with Rnet CxSM. It has the function of
checking for the presence and effective functioning of the sensors of the seating system.

There is no required access, modification or customization of this part of the software.

In case of problems with this part of the software please contact the
manufacturer.



User Software of the Rnet System

This part of the software is made by Neatech. It is intended to customize driving and seating
function  of  the  wheelchair.  It  is  responsibility  of  Neatech  to  correct  program  parameters
regarding the structure of the wheelchair.
This part of the software can be further divided into two parts: programming of seating function
in the CxSm and programming of driving and seating parameters with the Rnet software.

Programming must be conducted only by qualified personnel with in-depth
knowledge of the wheelchair and Rnet system.
Any change to this part of the software may result in a hazardous situation
for the user.

«
...
69
70
71
72
73
...
»

Содержание EVO3






























































































Отзывы:

Нет отзывов