Neatech EVO3, Руководство по обслуживанию, Страница: 53 / 93

www.neatech.it
53
3.9 Light on traction wheel
First assure that the wheelchair is on a level surface and it is at the default position (see section
2.7.2 ).
If the wheelchair has any problem at the seating system for which it is not
possible to reach the default position, please contact the manufacturer
Remove the traction wheel as explained in section 3.4,then remove the screws (1) shown in
Figure 61, unplug the cable and take away the plate and the fender in this order.
Keep the plate in order mount again the fender.
Contact the manufacturer to establish the extent of the damage and to decide if it is more
convenient a repair or a complete replacement of the part.
In case it is more convenient a repair sent the broken part to the
manufacturer.
Pack the part that need to be substituted or repaired and contact the
manufacturer to know the address of shipment.
Pay special attention to the packaging in order to avoid any damage during
the transport.
Figure 61
To mount the new part follow the instruction in reverse order.
Part number Description
R042-021a Light on traction wheel for FWD wheelchair
R042-021b Light on traction wheel for RWD wheelchair
These light are front lights for FWD wheelchair and rear lights for RWD wheelchair.
1