Neatech EVO3, Руководство по обслуживанию, Страница: 30 / 93

www.neatech.it
30
2.7.6 Use as seat in motor vehicle
Hooks for local travel (four-point tie-down)
The wheelchair was tested when used as a front-facing seat in a motor vehicle, meeting the
requirements of ISO 7176-19
The way of access to the motor vehicle and handling
within it is influenced by the size of the wheelchair.
For a safe use of the wheelchair as a seat in a motor vehicle please follow this instructions:
It is recommended to use the pelvic seat belt along the front of the pelvic area, so that the angle
of the belt is between 30° and 75° from the horizontal, as shown in Figure 30; a greater angle,
always in the expected range, is preferable.
Figure 30
You should keep your seat belts as tight as possible to the body, but without affecting the
comfort
Make sure that the belts are not twisted during use.
It is recommended to use both the pelvic belt and the shoulder belt to reduce the possibility of
impact of the head and chest with vehicle components.
Figure 31